12 Best Miniature Storage Cases (September 2026) Reviewed

A good miniature case stops the familiar transport disasters: snapped antennas, chipped paint, loose weapons, and models that rattle against each other on the way to a game. The best Miniature Storage Cases separate models or hold magnetized bases in place, so a painted army arrives looking like it did when it left the shelf.

We compared the verified specifications, included components, buyer feedback summaries, capacities, weights, and stated limitations for 12 cases. The result covers magnetic display cases for magnetized bases, hard-shell foam carriers for standard figures, and compact storage for a small collection in 2026.

My short version is simple: choose magnetic trays when delicate silhouettes and fast setup matter, and choose fitted foam when you need each miniature physically isolated. Check the actual base sizes, model height, and case dimensions before committing; an advertised slot count means little if your army contains tall banners, cavalry, or vehicles.

Top 3 Picks Answer the Main Storage Needs

For a large magnetized force, the WELIDAY leads with five adjustable metal trays, locks, and a clear display panel. For standard 25–28 mm figures in a light soft carrier, the 108-slot TPCY has the most stated foam capacity per layer, while the CASEMATIX hard-shell 80-slot case is the pick for a protected, customizable foam layout.

Miniature Storage Cases in 2026 Cover 12 Verified Options

Use this overview to narrow the field by protection method first. Magnetic cases need magnetized bases, while foam cases work with unmodified models but demand close attention to slot dimensions and fragile overhangs.

1. WELIDAY Large Case Is Best for a Magnetized Army and Display

The WELIDAY is the strongest all-round magnetic choice in this list if your models already have magnets under their bases. Its five metal trays can be set at different heights, which matters when a force mixes ordinary infantry with taller characters or a few bulky units.

The stated 13.5 by 13.5 by 15.7 inch footprint and capacity of up to 2,000 points of standard-sized miniatures place it in full-army territory. Its acrylic panel also makes it a credible home display option rather than a carrier that disappears into a closet.

Magnetized bases make the adjustable trays practical

I would reserve this design for bases fitted with magnets, because the steel tray system is the reason to buy it. Start with your tallest model, set that shelf first, then use the remaining gaps for lower squads.

The listing says larger units may need extra space, so do not treat the points claim as a fixed physical capacity. A dense infantry force and an army of tall centerpieces occupy this case very differently.

The clear panel makes dust protection part of storage

The transparent front lets you see the collection without taking it out, while the latches and two included keys add a security feature for storage or travel. The metal construction and display focus are repeatedly praised in the available customer-feedback summary.

It is explicitly not water resistant, so I would still keep it away from wet pavement, rain, and drinks at an event. The case protects against shifting when magnets hold, not every environmental risk.

2. CASEMATIX 80-Slot Hard Shell Is Best for Custom Foam Protection

The CASEMATIX hard-shell carrier takes the foam route with two pre-cut 40-figure layers for standard 25–28 mm models and one customizable layer for larger pieces. It is a sensible answer when you do not want to magnetize every base or when isolation matters more than rapid deployment.

At 16 by 13 by 6 inches and 4.2 pounds, it is shaped like a focused transport case rather than a display cabinet. The reviewed product data reports more than 1,000 ratings, with feedback emphasizing its hard shell and the ability to change the layout.

The mixed foam layout handles ordinary troops and special units

The listed pre-cut openings measure 2 by 1 by 1 inches, so measure the widest part of a figure instead of only its base. The 14 by 9 by 1.75 inch customizable tray gives you a place to remove material for larger models.

Foam physically separates miniatures, which can be helpful for unmagnetized figures. It can still snag a delicate spear or antenna when a model is pulled out, a concern miniature communities raise often.

The hard shell is suited to rougher local travel

Heavy-duty latches, a folding handle, and padlock rings build a useful outer layer around the foam. Bring your own padlock if you need that extra closure, since one is not included.

This is not rated water resistant, so it should not be treated as sealed luggage. For car rides, game nights, and a standard force of compact figures, its protection-first layout is easy to understand.

3. TPCY 108-Slot Bag Is Best for Lightweight Standard Figures

The TPCY bag holds 108 standard figures across three separate foam layers, and its stated 1.41-pound weight stands out among foam options. For a player carrying mostly regular 25–28 mm figures to a game, less empty case weight can be a real relief.

Each layer has 36 pre-cut compartments behind its own zipper. That division means you can carry only the layer needed for a small session, or remove foam and use the bag for a Player’s Handbook and accessories.

The pre-cut dimensions decide whether your figures fit

The provided slot measurements are about 2 by 1.1 by 1.25 inches. That is a useful fit for conventional small figures, but not an automatic fit for capes, wings, tall banners, or broad scenic bases.

I would make a paper rectangle matching the slot before buying for a collection with unusual poses. It is a quick way to identify a model that will be pressed into foam rather than held safely.

The three zippers give flexible access at game night

Separate zippered compartments make it easier to open one layer instead of exposing every miniature at once. The Oxford-cloth construction is bag-like rather than a rigid shell, so pack it where other gear cannot crush it.

There is a top handle but no shoulder strap in the stated specifications. That makes this better for short carries and organized transport than for a long walk with books and terrain.

4. CASEMATIX 144-Slot Case Is Best for a Dense Foam Collection

This CASEMATIX option packs four 36-slot trays into a hard EVA outer case. It is the foam carrier to consider when a large number of similarly sized standard miniatures matters more than a custom layout.

The case weighs 2.5 pounds and includes a removable shoulder strap with metal hardware, a soft rubber handle, and an ID card holder. Those details make sense for a player who takes the same case to recurring club nights or events.

The 144-slot count works best with uniform base sizes

Each stated opening is 2 by 1 by 1 inches. The divider walls can be cut with scissors to create a bigger space, but doing so reduces the headline slot count and leaves fewer individual separations.

Plan the tray layout by model type before cutting anything. Keep the untouched layers for troops, then alter only one layer for a character, monster, or oddly based model.

The EVA shell adds travel protection without a metal frame

The hard shell and shock-absorbing foam address drops and bumps while keeping the case more portable than a display cabinet. User feedback summarized in the product data highlights protection and organization, although its review pool is smaller than the 80-slot CASEMATIX.

For tall or delicate miniatures, check the one-inch slot depth carefully. This is a high-density foam solution, not a universal container for every silhouette.

5. Liyirui 120-Slot Case Is Best for Trim-to-Fit Foam

The Liyirui combines 120 pre-cut spaces with an ABS hard shell and foam that can be trimmed for larger models. That is useful for a player whose army is mostly standard infantry but includes a limited number of pieces that will not fit a fixed opening.

It has three 40-compartment layers, padlock holes on both sides, and stated interior dimensions of 16.9 by 11 by 4.3 inches. The product information lists a six-pound weight, so its protection comes with a heavier carry than soft cases.

The customizable layer gives mixed armies some breathing room

The standard slots are listed at 2 by 1 by 1 inches, while the foam can be trimmed around a larger miniature. Cut conservatively and leave enough foam around the model to cushion it from the shell.

That approach is better for a few exceptions than for a whole vehicle-heavy army. Many extensive cutouts turn a neat foam case into a less stable general-purpose compartment.

The ABS shell is aimed at impact protection

The hard exterior protects against falls and scratches, and the padlock holes offer an option for securing the closure. A padlock is not supplied, and the product is not listed as water resistant.

The available feedback notes solid construction and customizable foam, but it comes from a smaller review sample than several cases here. I would judge it by the precise models you intend to trim around, not its raw slot total alone.

6. TORIBIO Hard Shell Case Is Best for Tear-Off Foam Adjustments

The TORIBIO offers a hard shell with two micro tear-off foam pieces plus a foam bottom, giving you more freedom than fixed slots. Its listed capacity is 108 or more standard 25–28 mm miniatures, but the actual result depends on the shapes you remove.

The exterior measures 16 by 13 by 5 inches, while the stated interior is 15 by 11 by 3.5 inches. That shallow interior dimension is the number to use when checking tall models, not the exterior measurement.

The tear-off pattern works for awkward model outlines

The foam pieces are specified at 15 by 11 by 1.2 inches, and the pre-cut squares are based on 2 by 1 by 1 inch spaces. You can join squares to accommodate a wider base or special pose.

For a fragile model, leave a border of foam rather than making the hole tight. Communities regularly mention foam catching delicate parts, so lift the miniature straight out instead of twisting it free.

The claimed water resistance needs sensible limits

Its listed features include waterproof and drop-resistant protection, along with padlock holes and a carry handle. Those traits are useful for ordinary transport, but I would still protect the case from prolonged rain or standing water.

Availability was limited in the analyzed listing, which is worth checking when you are ready to buy. The product-feedback summary praises its shell and flexible foam arrangement.

7. Madcat 64-Slot Case Is Best for a Small 32 mm Force

The Madcat is a compact hard-shell EVA carrying case with two trays and a stated 64-miniature limit. It distinguishes between 32 mm and 25 mm base openings, making it more informative than a generic foam carrier for players who know their base sizes.

At 1.7 pounds, this is one of the lighter hard-shell choices. The zippered mesh pocket for books and the adjustable shoulder strap make it well suited to a small force or a roleplaying kit.

The base-specific tray layout reduces guesswork

Each tray has 28 spaces for 32 mm bases and four for 25 mm bases. The stated 32 mm spaces are 2.1 by 1.38 by 1.26 inches, while the smaller openings are 1.8 by 1.38 by 1 inch.

Dividers can be cut with scissors for a bigger opening, but this is most appealing when you can leave the layout intact. A case with only two trays fills quickly once you start removing dividers.

The accessory pocket keeps a small game kit together

The mesh pocket gives rulebooks or thin accessories their own space, instead of putting them on top of the foam. That separation matters because loose books can press into a case during travel.

For a growing army, treat 64 slots as a travel subset rather than permanent whole-army storage. Its value is tidy portability, not maximum capacity.

8. Jucoci Magnetic Case Is Best for Adjustable Tray Access

The Jucoci is a magnetic miniature transport case with four metal trays and adjustable shelf height. If your goal is to lift an entire squad out by its bases instead of pulling individual models from foam, this design speaks directly to that routine.

Assembly is required, which is the main tradeoff. The analyzed feedback says buyers appreciate the trays and height adjustment, while some report that assembly needs more patience than they expected.

Magnetic transport protects parts that foam can catch

Magnetic trays avoid the rubbing and pulling associated with tightly fitted foam. They are especially appealing for spiky figures, banners, and wide stances, provided the base magnets have enough hold for the model’s weight.

The case itself does not solve a weak magnet. Test a finished model on a steel surface and gently tip it before trusting it to a vertical or moving transport setup.

Assembly should happen before an event deadline

Build the case and set the tray heights before packing a fully painted army. That lets you identify where a tall character, vehicle, or flying stand needs a larger gap without rushing before a tournament.

The listing also makes clear that miniatures are not included. This is a storage system built around your existing collection and your own base preparation.

9. RISOU 128-Slot Case Is Best for Double-Sided Foam Access

The RISOU uses a double-sided layout with four foam layers and 128 stated slots. Clear top lids let you see what is stored on each side, which is a small but useful feature when different squads travel in separate halves.

The rigid polypropylene body measures 14.25 by 10.5 by 4.8 inches and weighs 1.1 kilograms. Its handle is described as rigid PVC to help prevent breakage, making this a practical all-in-one carrier for standard-sized figures.

The clear lids make packed squads easier to identify

Visibility cuts down on opening both halves just to locate one group. I would label each side by game system or unit type and keep a little space in the foam for any base that extends beyond the standard footprint.

The declared slot size is about 2 by 1.1 by 1.25 inches. That makes precise model measuring just as important here as it is with any pre-cut foam case.

The double-sided design favors organized infantry storage

Independent opening sides mean one group can be accessed while the other remains closed. It is a smart layout for troops, tokens, and figures that all share a broadly similar size.

There are no stated cons in the product review data, but that does not make it the right pick for oversized or top-heavy miniatures. Those models need a custom foam space or magnetic support.

10. ODOXIA Display Case Is Best for a Visible Magnetic Collection

The ODOXIA is a display-first case with five removable metal trays and magnetic tray surfaces. Its 13 by 9.3 by 16.1 inch form gives a painted collection room to be viewed at home and then carried when needed.

That flexibility comes with a stated weight of 6.58 kilograms, so I would see it as a shelf-to-car transport case rather than something to carry over a long convention day. Feedback favors the tray adjustment and display use, while weight is the recurring concern.

The removable trays support a display-to-game routine

Magnetized bases stay where you placed them as a tray is removed, helping you arrange an army by unit or battlefield role. Adjust the tray heights around the tallest figures before loading the rest of the collection.

Unlike fitted foam, a metal tray does not isolate every part from movement if the magnet bond fails. Use a compatible magnet on every model and do not stack loose accessories on the shelves.

The freestanding case suits home storage more than air travel

The acrylic display construction offers a clear visual home for collectibles, and the carry handle allows occasional relocation. It does not replace careful packing for airline travel, especially given the weight and tall profile.

The analyzed availability data was limited at the time of collection. If a transparent display is your priority, this is one of the more purpose-built options in the roundup.

11. ZXQDRE Medium Case Is Best for a Locked Magnetic Display

The ZXQDRE medium case combines an aluminum-alloy frame, five metal trays, a clear acrylic panel, and two keyed locks. It arrives without assembly, which is welcome for a storage case intended to move from display duty to transport quickly.

Its listed dimensions are 13.78 by 10.63 by 15.75 inches and the stated weight is 10.5 pounds. That is substantial but reasonable for someone who values rigid construction, visible storage, and a locked enclosure.

The keyed enclosure adds a security layer for storage

Two integrated key locks are useful when the case is displayed in a shared space or taken to an event. They secure the enclosure, though they do not substitute for a careful check that every miniature is fixed to its tray.

The case is not water resistant, so secure storage still means a dry indoor location. The clear panel is also a reminder to limit long periods in direct sun if paint fading is a concern.

The tray system needs your own compatible magnets

Magnets are not included for base fixation. The product feedback summary also mentions tray-stability complaints, so I would test the shelves and the magnetic hold with a few models before packing everything.

This makes sense for a collector willing to do that setup work. It is not the hands-off pick for unmagnetized models or an army that must be packed at the last minute.

12. ITHWIU Six-Tray Case Is Best for Dustproof Acrylic Display

The ITHWIU is a transparent acrylic case with six adjustable metal trays and magnetic double doors. It is primarily for displaying and protecting a collection from dust while keeping individual miniatures visible from outside the enclosure.

The case measures 12.5 by 9 by 16.7 inches and weighs 4.5 kilograms. It requires screw mounting and protective-film removal before use, so it is more of a small home project than a grab-and-go foam bag.

The sealed acrylic enclosure helps with long-term dust control

A dustproof structure matters for painted miniatures that would otherwise need frequent handling and cleaning. Keep the case away from direct UV exposure, because acrylic walls do not mean paint is automatically protected from sunlight.

The clear construction can suit miniatures, figures, dolls, jewelry, and other small collectibles. For tabletop use, the key question is whether each tray can be spaced to fit the height of your models.

The six metal trays require a separate magnet plan

The shelves are metal and height adjustable, but magnets for the miniature bases are not included. Choose a base magnet only after checking its fit and confirming that it holds the model securely on the tray.

The magnetic doors offer simple access, while the screws and acrylic construction mean this is better placed on a stable tabletop than treated like hard luggage. Its feedback summary is positive about dust protection and capacity, though based on a limited review count.

Choose a Case by Protection Method, Army Size, and Travel Plan

Foam and magnetic cases solve different problems. Foam holds each miniature in a cavity and works with unmodified bases; magnetic trays hold models upright on steel surfaces and preserve quick access to whole squads.

For a small collection or a roleplaying group, a 64-slot or 80-slot foam case can be easier to fill and carry. A medium infantry army fits the 108-, 120-, 128-, or 144-slot foam formats when the stated openings match, while a large mixed army benefits from adjustable magnetic shelf heights.

Magnetic cases are better for fragile silhouettes when bases are prepared

Magnetic cases such as the WELIDAY, Jucoci, ODOXIA, ZXQDRE, and ITHWIU are a strong fit for models with fragile spikes, banners, or wide poses. Nothing needs to be pushed through a narrow foam opening, and squads can go from shelf to table with fewer individual handling steps.

Use rare-earth or neodymium magnets only after checking that the magnet fits beneath the base and has enough surface contact. A good practical test is to place the completed model on a steel tray, tilt it gradually, and confirm the base stays put without relying on a vague strength claim.

Foam cases are better when you cannot or do not want to magnetize

Foam is direct: put one model in each cavity, close the case, and the material cushions the model. The tradeoff is fit, because slot dimensions must account for the base, pose, and any part that rises above or sticks beyond the body.

For tall, spiky, or top-heavy models, choose a customizable foam tray or remove dividers only where needed. Avoid compressing a model into a tight cavity; pressure and repeated removal can damage paint or catch a fragile detail.

Mixed armies need a planned layout instead of a single capacity number

Start by grouping models into standard infantry, tall characters, cavalry, vehicles, and fragile centerpieces. Then assign the most uniform figures to fixed foam slots and reserve flexible foam or tall adjustable shelves for the exceptional models.

That simple inventory prevents the common mistake of buying a case that technically holds a large number of miniatures but cannot accommodate the figures you care about most. Growing armies also deserve spare room, not a case filled to the very last opening.

Travel planning starts with dimensions and carry weight

For airline travel, check the carrier’s current carry-on rules against the case’s exterior dimensions before leaving home. Keep it with you where possible, and use a case with secure closures; checked luggage exposes painted miniatures to more uncontrolled impacts.

A shoulder strap helps on long walks, while hard shells add more confidence around bags and terrain. A display case can move safely by car, but a heavy acrylic or metal case is rarely the most comfortable option for a long terminal or convention floor.

Long-term paint care depends on a clean, dry, shaded location

A case limits dust and handling, but it cannot make paint immune to sun, moisture, or abrasion. Keep the collection in a dry room away from direct sunlight, and do not place heavy rulebooks, dice, or terrain loose beside exposed models.

Before each trip, give the case a gentle shake test with the lid closed. Any rattle is a warning that foam gaps, loose bases, or tray spacing need attention before the journey.

Frequently Asked Questions Give Direct Storage Answers

The Best Choice Depends on How Your Miniatures Travel

The WELIDAY is our first pick for a magnetized army that also deserves a visible, lockable home. Choose the CASEMATIX 80-slot hard shell for protected foam storage with a flexible tray, the TPCY for a light high-capacity standard-figure bag, or any of the adjustable magnetic display cases when upright storage is the priority.

For the best Miniature Storage Cases in 2026, measure every unusual model, match the protection method to its base, and test the packed case before the first real trip. That small amount of planning is far kinder to a painted army than repairing a snapped banner after game night.